Brief overview Chemical protective suits
Other models and brands are available from us on request.
Information Chemical protective suits
PM Interceptor (ET)
The “PM Interceptor” is a Cat. 3 Type 1-A suit with EN 943-2-ET approval.
In addition to its EN943-2 ET approval, the Interceptor offers the user the following features:
• approximately 15 percent lighter weight compared to similar suits
• Variable visor size
• Available with front or back entry
• Heat cover and test equipment available separately
Designed as a limited use suit, the suit can either be disposed of after use or, if no contamination has occurred, it can be re-stored. The test kit, available separately, greatly facilitates leak testing in the field.
Among other things, the Interceptor sets new standards with a new visor design featuring an outer layer of Teflon and an inner layer of PVC, which together form an extremely effective barrier layer. The same applies to the superimposed seams, which are additionally reinforced on the inside and outside with heat-sealed chemical tape. The proven combination of North SilverShield (inside) and neoprene is used for the gloves, and the St. Gobain “One Glove” system is also available as an option.
The version with socks allows individual fitting with boots.
PM Full protection suit
The “PM Full Protection Suit” is a Cat. 3 Type 2-B suit with NBC protection (atomic, biological and chemical), made with Tessaform material.
• Model with bulge for the accommodation of the breathing apparatus
• i.e. mostly the suit is worn only as a cover over or around a compressed air cylinder
Protective clothing with seam cover with hot melt tape (TopGuard Technology)
Gasguard® T2 suits have good electrical properties, do not become electrostatically charged and have a residual potential decay time that is neither too short nor too long. In special environments with controlled static electricity with a high risk of deflagration, the person in charge may consider it necessary for the wearer to put on static dissipative technical footwear, as provided by the IEC EN 61340-4-3, EN 345 and EN 346 standards.
PM Jetguard Plus
The “PM Jetguard Plus” is a Cat. 3 Type 3-B suit with NBC protection (nuclear, biological and chemical), made with Tessaform material.
Product features:
Chemical protection suit with
• neoprene sealing lip,
• horizontal back entry,
• hood,
• integrated booties with leg cover
• welded gloves with sleeve overcast
Protective clothing with seam cover with hot melt tape specially secured by extra covers of the seam as well as the latest technology in processing.
Anti-static properties:
Jetguard® PLUS protective clothing has good electrical properties, does not charge electrostatically and has a residual potential decay time that is not too short and not too long. In particular environments with controlled static electricity with a high risk of deflagration, the responsible person may consider it necessary for the wearer to put on static dissipative technical footwear, as provided by the IEC EN 61340-4-3, EN 345 and EN 346 standards.
Cover Base
The “Cover Base” is a Cat. 3 Type 5 & Type 6 suit.
• high barrier against particles and liquids
• 4-ply polypropylene spunbond 55g
• Color: White
Product Description:
This limited use chemical protective suit made of 4-ply polypropylene nonwoven, features a zipper that extends to the chin and is double covered, a hood, and elastic on the arms, legs and back. The outer material polypropylene fleece is tear-resistant, breathable and reliably protects against particle and liquid contamination.
Areas of application:
Asbestos disposal, chemical and pharmaceutical industry, automotive manufacturing, nuclear industry, food industry, paint manufacturing, waste disposal, veterinary medicine, decontamination work.
Valid and confirmed test standards:
• EN 13982:2009: Type 5
• EN 13034 type 6
PM Chemical protective coverall A-C3FR/5
The “PM chemical protective coverall A-C3FR/5” is a protective suit of cat. III, type 5 + 6.
The blue coverall is flame retardant according to EN 533:Index 1, particle tested according to EN 13982-1, limited splash proof according to EN 13034 and antistatic according to EN 1149-1.
In addition, the A-C3FR/5 coverall is water vapor permeable and has a three-piece hood with face elastic for optimal sealing.
The step insert, as well as elasticated waist, arms and legs ensure the suit fits securely, comfortably and tightly.
The seams are external and the zipper is covered so that you do not accidentally get caught, or the suit can be opened.
Applications:
Refineries, nuclear power plants
Valid and confirmed test standards:
• EN 13982:2009: Type 5
• EN 13034 type 6
PM CoverChem CC30
Protective coverall for use / handling of inorganic chemicals and biological hazardous substances.
Product details:
• Hood with elastic band
• Arm and leg elastic
• thumb loop
• tight mask cuff
• taped seams
• additional taped chin cover
• zipper with double glueable cover
• color yellow
• size: S- XXXL
Valid and confirmed test standards:
EN 14605; liquid-tight
EN 14605; spray-tight
EN ISO 13982-1; particle-tight
EN 13034; limited splash tightness
EN 1073-2; contamination protection against radioactive particles
EN 14126; infection protection against blood and viruses
EN 1149-5; antistatic
EN ISO 14116-1/0/0; flame retardant suitable for Ex-zones
Other models and brands are available from us on request.
We create solutions.
As an experienced partner in the field of occupational health and safety and sound know-how, we offer you sustainable and perfectly fitting solutions, individually tailored to your requirements.
Do you have a problem or a task for us? Do you need comprehensive advice on occupational health and safety? Then we should talk about it as soon as possible.